Selecting the Antenna
76
1
Press the MENU button. Press the ▲ or ▼ button to select
“Channel”, then press the ENTER button.
2
Press the ENTER button to select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”,
then press the ENTER button.
Notes
• If the antenna is connected to ANT 1 IN (CABLE),
select “CABLE” and if it is connected to
ANT 2 IN (AIR), select “Air”.
• If both ANT 1 IN and ANT 2 IN are connected,
select the antenna input you want.
If the antenna input is not selected properly,
noise may appear on the screen.
or
Antenna : Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
†
More
Channel
TV
Move Enter Return
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
†
More
Channel
TV
Move Enter Return
Air
Cable
➤
➤
Quick way to select Antenna: Just press “ANTENNA” button on the
remote control.
BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 76
To Next Page
Loading...
