Samsung HT-C5500 - Quick Start Guide: Video Connection to TV; Connecting Video Output to TV

4 Connecting the video out to your TV
Choose one of the three methods for connecting to a TV.
METHOD 2
TV
@PR
COMPONENT IN
©J
VIDEO IN
METHOD 3
METHOD 1
LJ . '""" , _= I II
~~_-----..::==~.J-.--U
r---------I@J) (1111I11I1)
L..- --l
HDMIIN
Red Blue Green
LAN
METHOD 1 : HDMI (BEST QUALITY)
Use this connection for the best quality 1080p high definition picture with Blu-Ray discs.
Connect an HOMI cable (not supplied) from the HOM I OUT jack on the back of the product to the HOMI IN jack on your TV.
METHOD 2 : Component Video (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video
Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
METHOD 3: Composite Video (GOOD QUALITY)
Connect the supplied Video cable from the VIOEO OUT jack on the back of the product to the VIOEO IN jack on your TV.
~NOTE
• Certain HOMI output resolutions may not work, depending on your TV.
• If an HOMI cable is connected from the product to a TV, the product's output is set to HOMI automatically within 10 seconds.
• If Component and HOMI are both connected, HOMI mode is automatically selected.
• When you connect the product to the TV using the HOMI cable for the first time or to a new TV, the HOMI output resolution will
be automatically set to the highest provided by the TV.
• If you connect a Sam sung TV to the product using an HOMI cable, the product can be easily operated using the TV remote
control. (This is only available with Samsung TVs that support the Anynet+ feature.)
• If the HOMI cable is connected or removed during playback of a COOA, MP3 or JPEG file, the product will stop playing.
• After making the video connection, set the Video input source on your TV to match the Corresponding Video output (HOMI,
Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• The actual resolution may differ from the.setting in the Settings menu if both Component and HOMI cables are connected.
The resolution may also be different depending on the disc.
• If the resolution is set to 'i' (ex: 480i or 1 080i) , the output is displayed in 30 frames per second and if set to 'p'(ex: 480p, 720p,
1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames) p : progressive mode (60 frames)
0- English