20 English
Connections
5
Insert and tighten three large screws into the three holes on the
bottom side of the stand-base as shown in the illustration.
5.
6
Connect the speaker wire to the speaker jack.
6.
7
Fully insert the Stand Bracket into the speaker's clasp to stand
speaker.
7.
8
Insert and tighten two small screws into the two holes to
connect them.
8.
Connecting the Speakers
HT-C7550W_ELS_0506.indd 20HT-C7550W_ELS_0506.indd 20 2010-05-06 11:28:202010-05-06 11:28:20
To Next Page
Loading...
