19
Connecting the Video Out to TV
You can adjust the resolution switch to set the HDMI and component (PR, PB
, Y) output resolution to
576p(480p)/720p/1080i.
Example: If the TV supports resolution up to 576p(480p)
•
If you connect the HDMI and Component outputs (PR, PB, Y) at the same
time, Component output resolution changes automatically to the
designated HDMI resolution.
Caution
Selecting Resolution
Set the resolution switch to 576p(480p).
•
A 576p(480p) video signal is output through the HDMI and component outputs (PR, PB, Y).
1
• If copy protection is in place, output resolution is automatically converted to 576p(480p) when you play the
DVD, even if you set the resolution to 720p or 1080i.
Note
1p~44p(DS1000)-GB-NOR 10/27/04 11:23 AM Page 22
To Next Page
Loading...
