ConnectingExternalComponents
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR.
t
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
AUDIO OUT
Optical Cable
(not included)
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog
component.
• Be sure to match connector colors.
3 Press AUX on the remote control to select 'DIGITAL IN /AUX1/AUX2' input.
• Each time the button is pressed, the selection changes as follows: AUX] -_ AUX2 -_ DIGITAL IN
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD -_ DIGITAL IN _ AUXI_ AUX2 -_ USB _ FM
• You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
To Next Page
Loading...
