Setting the TestTone
Use the Test Tone feature to check the speaker connections.
• The test tone will be sent to L -* C -*
R -_ SR -_ SL -_ SW in order,
If the ENTER button is pressed again
at this time, the test tone will stop,
RETURN button to return to the previous level.
MENU button to exit the setup screen.
Press TEST TONE button.
• Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode,
• Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
f ........................................................................................................................... \
L:FrontSpeaker(L) C:CenterSpeaker SW:Subwoofer J
R:FrontSpeaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Start
To Next Page
Loading...
