CONNECTING
THE
WIRELESS
SUBWOOFER
(HT-W81
G/HT-W81
R
ONLY)
The Subwoofer's linking
10
is
preset
at
the factory and the
main
unit and sub should link (connect wirelessly)
automatically when turned
on.
If
the link indicator does not light when
main
unit and subwoofer
are
turned
on,
please
set the
10
by following the process below.
1. Plug the
power
codes of the main unit and subwoofer into the AC
power
supply.
2. Press the
10
SET button on the
back
of
the subwoofer with a small pointed object for 3 seconds.
• The STANDBY indicator
is
turned off and the LINK indicator
(blue
LED)
blinks quickly.
10
SET
•
STANDBY LINK
•
(')
o
z
Z
m
(')
-f
6
z
(J)
3. While main unit
is
powered off (STANDBY mode), press
MUTE
on the
remote control for 5 seconds.
• The volume
Level
Indicator
on
the main unit lights up, then returns to
STANDBY mode.
4. Press the POWER button
to
turn on the main unit.
• The main unit and the subwoofer
are
now linked (connected).
• The Unk indicator
(blue
LED)
on
the subwoofer
is
turned
on.
• You can enjoy better sound from the wireless subwoofer by selecting the
sound field mode. (
See
page 16 )
VOl
TV
SOURCE
TV
CH
Before moving or installing the product,
be
sure to turn off the power and disconnect the power
cord.
If
the main unit
is
powered off, the wireless subwoofer will be
in
the standby mode and the
STANDBY LED on the upper side will blink.
If
you use a device such as a microwave oven, wireless LAN Card, Bluetooth eqUIpment, or
any other device that uses the same frequency
(204GHz)
near the system, some sound
interruption may be heard due
to
interference.
The transmission distance of the wireless signal between the main unit and sub
is
about 32
feet, but may vary depending on your operating environment. If a steel-concrete
or metallic wall
is
between main unit and the wireless subwoofer, the system may not
operate at
all,
because the wireless signal cannot penetrate metal.
If
the main unit doesn't make wireless connection, follow steps 1-4 above
to
retry the
connection between the main unit and wireless subwoofer.
! · The wireless receiving antenna
is
built into the wireless subwoofer. Keep the unit away
from water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location
is
clear of any obstructions.
13
To Next Page
Loading...
