Samsung HT-WS1R - DESCRIPTIONS; REAR PANEL

9
ENG
● DESCRIPTION
REAR PANEL
STANDBY LED
The standby LED lights up in standby mode.
The standby LED turns off when the power of the unit is turned on.
POWER SUPPLY
CABLE
Plug the power supply cable into the AC wall outlet.
AUDIO IN JACK
Connect to the analog output of an external device.
DIGITAL IN JACK
Connect to the digital (optical) output of an external device.
When disconnecting the power cable from the wall outlet, hold the plug.
Do not pull the cable.
Do not connect this unit or other components to the main power until all connections
between components are complete.
▪
▪
DIGITAL IN
(OPTICAL)
A
U
D
I
O
IN
3
4
2
1