Samsung HW-A450 - Soundbar Connection Procedures; Connecting Power and Units; Manually Connecting the Subwoofer

03 CONNECTING THE SOUNDBAR
Connecting the power and units
For more information about the required electrical power and power consumption, refer to the label attached to
the product. (Label: Bottom of the Soundbar Main Unit)
Rear of Subwoofer Bottom of the Soundbar Main Unit
English – 3
Manually connecting the Subwoofer
1 → 2 → 3 → 4
1 Subwoofer
ID SET, LINK STANDBY, Read and Blue is On, 5
Sec, Blinking blue fast
2 Remote Control First, press the button on the
remote control to turn on the display, and then press the Up button on the remote control for at least 5 seconds.
3 Soundbar
4 Connection complete The LINK LED indicator stops blinking and glows a solid blue (connection complete).
NOTES
If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference