Samsung HW-A60M - Using the Remote Control; Media Playback and Navigation Controls

ENG - 24
󱂗
PAIR
Bluetooth
PAIR
Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
󱂘
Play / Pause
Press the p button to pause a music le temporarily.
When you press the button again, the music le plays.
󱂙
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in “USB” mode, press the Up button.
• Music Skip
Press the Right button to select the next music le. Press the Left button to select the
previous music le.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a
wireless subwoofer or wireless rear speakers).
󱂚
Sound Control
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence.
The desired settings can be adjusted using the Up/Down buttons.
• To control the volume of the treble or bass sound, press the (Sound Control) button
to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Down buttons. (Make sure the Sound mode is set to “STANDARD”.)
• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to “STANDARD”.)
• If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control) button to select AUDIO SYNC and then set the audio delay
between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” or
“BT” mode.)
• AUDIO SYNC is only supported for some functions.
• When the Rear Speakers (sold separately) are connected, the settings REAR SPEAKER
ON/OFF and REAR LEVEL are supported.
Use the Up/Down buttons to set the REAR SPEAKER ON/OFF and to adjust the
volume of the REAR LEVEL between -6 to +6.