Samsung HW-B650 - Wired Connections; Wireless Connections

NOTES
• If you use a device that uses the same frequency (5.8GHz) as
the Sound bar near the Sound bar, interference may cause some
sound interruption.
• The maximum transmission distance of the main unit's wireless
signal is about 32.8 ft (10 m), but may vary depending on your
operating environment.
04
CONNECTING WITH A
CABLE
--•- ...... n .........
Optical Cable
,: ■
■ = I
HDMI Cable (not supplied )
■ ~1
D. IN
TV/ BD / DVD player/
Bottom of the Soundbar
mode
Set-top box/
Game console
■ -ti-I
TVARC
mode
TV
Bottom of the Sound bar
External Device
■ -ti-
HDMI
■ -ti-
mode
TV
Bottom of the Sound bar
NOTES
• If TV sound is inaudible, press the ~ (Source) button on the
remote control or on the top of the Sound bar to switch to "D .I N"
mode. The screen displays "D. IN " and " TV ARC" in sequence, and
TV sound is played.
• The recommended cable is High Speed HDMI Cable with
Ethernet.
• When you use an optical cable and the terminals have covers, be
sure to remove the covers.
05
CONNECTING WIRELESSLY
Connecting a TV or Bluetooth Device via
Bluetooth
Top of the Sound bar
BT PAIRING
OR
··t··
OR
D
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can search for previously
connected TVs or connect a previously connected mobile device
to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to
the Sound bar (Press the * PAIR button on the remote control
or press and hold the~ (Source) button on the top of the
Soundbar for more than 5 seconds while the Sound bar is in " BT"
mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
Bluetooth Multi connection
The Soundbar can be connected to 2 Bluetooth devices at the same
time.
□ ·+·
®
·+· □
Bluetooth
Bluetooth
device A
dev i ceB
• Play music from one of the connected Bluetooth devices while
two devices are connected.