connections
INSTALLING THE WALL MOUNT
You
can
use
the
wall
mount bracket to mount this
unit
on
a
wall.
Installation
Precautions
• Do not install on a place other than a vertical wall.
• For the installation, avoid a location with high temperature
or
humidity,
or
wall that cannot sustain the
weight of the set.
• Check the strength of the wall. If the strength of the wall
is
insufficient for the product installation, make
sure
to
reinforce the wall before the installation.
• Check the material
of
the wall. If the wall
is
made of plaster board, marble, or iron board, purchase and
use the appropriate fixing screws.
• Cables connecting
to
external devices need
to
be connected to the set before installing.
• Be sure
to
turn off and unplug the unit before installation. Otherwise, it may cause electric shock.
I
•
(")
0'
z
z
~
o
~
1. Place the wall mount bracket on a wall surface
and
then
secure
it
with two screws (not supplied).
2. Then, fit the unit into the corresponding slots
of
the wall
mount bracket. For secure installation, make sure the
mounting studs slide firmly down into the bottom of the
slots.
3. This is the completion
of
the suggested wall mount
installation.
2
I
I
".,
..
...
~~_
._~
~_
...
_~_~
__
~~
...
4
• 2 inches
(5
cm) or more
• Do not hang onto the installed unit and avoid any impact to the unit.
• Secure the unit firmly to the wall so that it does not
fall
off. If the unit falls off, it may result
in
an injury or damage to the product.
• When the unit
is
installed on a wall, please make sure that a child does not pull any of
connecting cables, as
it
may cause
it
to
fall.
• For the optimal performance
in
a wall mount installation, keep the speaker system at least
2 inches
(5
cm) distant from the
lV.
11
To Next Page
Loading...
