Samsung HW-D550 - Connections; Audio and Optical Connections; Analog Audio Input; Digital Audio Input (Optical)

CONNECTING THE CRYSTAL SURROUND AIR TRACK
This section explains two ways (digital and analog) of connecting the unit to the 1V.
This unit is equipped with two optical digital jacks and one audio analog jack for connecting a 1V.
::~.'~~
:.~ ..... ~: .. j ++---+-t-
AUDIO IN
Audio Cable
or
TV
AUDIO
OUT
____ BD/OVD playerl
Set-top box!
Game console
or
Optical Cable
AUDIO IN
Connect AUDIO IN on the main unit to the AUDIO OUT of the 1V or Source Device.
Be sure to match connector colors.
or,
DIGITAL AUDIO IN (OPTICAL) 1,2
Connect the Digital Input on the main unit to the OPTICAL OUT of the lV or Source Device.
• Do not connect the power cord of this product or your 1V to the wall outlet until all
connections between components are complete.
• Before moving or installing this product, be sure to turn off the power and disconnect the
power cord.
• If you select IANALOG' without connecting the Audio Cable
l
the set is turned off automatically
after 20 minutes.
• If a1V or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off.)
• When Air Track isn1t linked with HT-WDC10 model in the W.iPod mode, Air Track will turn
off after 20 minutes.
16