Using the AUTO POWER LINK function
The Crystal Surround
Air
Track
is
automatically
turned on when you turn
the
power
on
of
a TV
or
any device
connected
to
the
Air
Track
with
the optical cable.
Press
AUTO
POWER on
the
remote
control
of
this
unit.
•
Auto
power
link
function
turns
on
and
off
each
time
you
press
AUTO POWER.
AUTO
POWER
LINK
ON
OFF
Display
POWER
LINK
ON
POWER
LINK
OFF
cr
·
If
a
TV
or
any
device connected to Air Track with the optical cable
is
off and there
is
no
digital input, the Air Track
is
turned off after
20
minutes.
Using the input
mode
You can select either HDMI, Optical Digital, Audio
input
or
W.iPod input.
~~~
~~
-:EI
I
Using
the
S.VOLUME function
Press INPUT SELECT on the remote control
<,)
or
touch
INPUT
S~LECT
(iii)
on the front panel repeatedly
to
select
the HDMI, Optical Digital, Audio input
or
W.iPod input.
Input
mode
Display
DIGI.1
Optical
Digital
input
DIGI.2
Audio
input
ANALOG
iPod
mode
W.iPod
HDMI.1
HDMI
input
HDMI.2
Although
it appears
on
the input mode display,
iPod
connection
is
not possible with this model.
It
is
only
available
with
model
HT-WDC10
(sold
separately)
This will regulate
and
stabilize
the
volume
level against a
drastic
volume
change
in case
of
a
channel change
or
scene transition.
[8J
DIMMER
ORe
~'IJ.?R
-
Press S.VOL on the remote control
of
this
unit.
• Each
time
the
button
is pressed,
the
selection
changes
as
follows
:
SMART
VOLUME ON -
SMART
VOLUME
OFF
To Next Page
Loading...
