9
ENG
DESCRIPTIONS
DESCRIPTIONS
REAR PANEL
Power Supply IN
Connect the AC power adaptor to
the power supply jack, and then
connect the AC power adaptor plug
to a wall outlet.
SERVICE Port(Only for update)
Use to update the unit's firmware.
AUX IN
Connect to the Analog output of
an external device.
OPTICAL IN
Connect to the digital (optical)
output of an external device.
● When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug. Do not
pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
● For safety information, including product identification and supply ratings, please refer to the main label on
the bottom of the device.
To Next Page
Loading...
