Samsung HW-H600 - Installing Remote Batteries

REMOTE CONTROL
10
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth Power function on and off.
See pages 16 and 18 for details.
POWER
Turns the SoundStand on and off.
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press SOUND EFFECT on the remote control to select a sound
mode. Select the STANDARD mode if you want to enjoy the original
sound. We recommend that you select a Sound Effect mode based on
the source material and your personal taste.
Skip Back
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
MUTE
You can turn the volume down to 0 with the push of a button. Press
again to restore the sound to the previous volume level.
SOURCE
MUTE
SYNC
SYNC
POWER
SOUND
EFFECT
REPEAT
Bluetooth
POWER
VOL
WOOFER
LEVEL
Surr.
Sound
DIMMER
AUDIO SYNC
If the SoundStand is connected to a digital TV and the video appears
out of sync with the audio, press the Audio Sync buttons to sync the
audio with the video.
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to
300 ms. In USB mode, TV mode, or BT mode, the Audio Sync
function may not work.
+ Installing Batteries in the Remote Control
1. Use a coin to turn the
remote control cover
counterclockwise to
remove it as shown in the
figure above.
2. Insert a 3V lithium battery. Keep the positive
(+) pole facing up when inserting the battery.
Put the battery cover on and align the '
'
marks side by side as shown in the figure
above.
3. Use a coin to turn the
cover clockwise as far as
it will go to fix it in place.