Samsung HW-J6501R - REMOTE CONTROL; Remote Control Buttons and Functions (Part 2)

:· (!)
B!D
6
10ia11i;tlli
SOURCE
Press to select a source connected to the
~
6
~
Sound bar.
?
~
[3
[3
Mute Sets the volume temporarily to 0.
~
.
Press again to cancel.
:. -
~
c:=:::::>
(;)
SOUND You can select from TREBLE, BASS or
1}()<]
t>OO
{>C;:>{J
CONTROL AUDIO SYNC.
• To control the volume of the treble or
bass sound, select TREBLE or BASS
in Sound Settings, and then ad j ust the
volume between -3-+3 by using the
O<J<J , C>{){l buttons.
• If the video and audio between the TV
and your Soundbar are not
synchronized, select AUDIO SYNC in
Sound Settings, and then set audio
delay between 0-300 milliseconds by
using the O<J<J , C>{){l buttons.
ml
Anynet+ You can turn the Anynet + and Auto Power
Link on or off.
The Anynet+ and Auto Power Link work in
reverse to each other.
• Anynet+: if connected through HDMI
Cable, you can control your Soundbar
with the Samsung TV remote control.
• Auto Power Link: the Soundbar is
automatically turned on when turning
on the TV connected through optical
input.
m
WOOFER You can adjust the subwoofer vo l ume
between -12, or -6 - +6 levels.
Installing the Battery in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
2. Insert a 3V lithium battery. Keep the
positive(+) pole facing up when
inserting the battery. Put the battery
cover on, and then align the '• '
marks side by side as shown in the
figure above.
· 16 · English
3. Use a suitable coin to turn
the remote control battery
cover clockwise as far as it
will go to fix it in p la c e.