How to reset Soundbar HW-M360/450
Initialization method Soundbar:
1. Set should be plugged in and in Standby Mode.
2. Press the “ VOL”(MUTE) button for 5 seconds in the remote control.
3. Front OLED will be Display
4. Initialization complete.
INIT
OK
Reconnection method Soundbar and Subwoofer
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
• The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
3. To finalize the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.
4. The main unit and the sub-woofer will pair automatically.
To Next Page
Loading...
