Samsung HW-Q70T - Manually Connecting the Subwoofer; Connection Procedure

ENG - 9
Manually connecting the Subwoofer
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer are connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
5 Sec
Rear of Subwoofer
Rear of Subwoofer
Blinking blue
fast
3. Press the Up button on the remote control for 5 seconds or press the ID SET button located at the
bottom of the Soundbar.
ID SET
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DC 19V
NETWORK ID SET
NETWORK ID SET
SOUND
MODE
PAIR
5 Sec
OR
Bottom of the Soundbar Main Unit
4. Check if the LINK LED is solid blue (connection complete).
Blue is On
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.