Connecting using an Optical Cable (D.IN)
NOTE
When the TV sound is not output, press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the “D.IN”
mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.
The recommended cable is High Speed HDMI Cable with Ethernet.
When you use an optical cable and the
Using the Q-Symphony Function
For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu,
“TV+Soundbar” appears under the Sound Output menu of the TV.
TV menu example: TV + [AV] Soundbar series name (HDMI)
NOTE
It can operate according to the Codec supported by TV.
This function is supported only when the HDMI Cable or Optical Cable (not supplied) is connected.
This function is available in some Samsung TVs and some Soundbar models.
When using Q-Symphony, you can only choose GAME PRO or ADAPTIVE SOUND.
Spacefit
The active sound measured from the TV is synced to the Soundbar.
NOTE
Only certain TV models support this function, and the function is operated from the TV.
USING A WIRELESS CONNECTION
Connecting via Bluetooth
What is the difference between BT READY and BT PAIRING?
BT READY: In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
BT PAIRING: In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the (Mic On/Off) button on the top of the Soundbar for more than 5 seconds while the
Soundbar is in “BT” mode.)
NOTE
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
Connecting via Wi-Fi (Wireless Network)
To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.) to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your mobile device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile device to connect the Soundbar to your Wi-Fi network.
Connecting To Apple AirPlay 2
With AirPlay technology, you can control your home’s audio system from your iPhone, iPad, HomePod, or Apple TV.
This Samsung Soundbar supports AirPlay 2 and requires iOS 11.4 or later.
TROUBLESHOOTING
Before seeking assistance, check the following.
To Next Page
Loading...
