EasyManua.ls Logo

Samsung HW-Q990D - Using Group Play

Samsung HW-Q990D
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENG - 15
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
Only one Samsung TV can be connected at a time.
Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the BT PAIRING mode.
PAIR
(OR)
a. Press the
(Multi Function) button on the top panel and then select BT”.
BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.
Top of the Soundbar
BT READY
b. When “BT READY appears, press and hold the (Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
display BT PAIRING”.
5 Sec
Top of the Soundbar
BT PAIRING
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List Soundbar Q-Series
(Bluetooth))
3. Select Soundbar Q-Series from the list on TVs screen.
An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
When the Samsung TV is connected, [TV Name] BT appears on the Soundbars front display.
4. You can now hear Samsung TV sound from the Soundbar.
After you have connected the Soundbar to your Samsung TV the rst time, use the BT READY mode to reconnect.
If the device fails to connect
If you have an existing Soundbar (e.g., Soundbar Q-Series) on the list of speakers on the Samsung TV, delete it.
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the mode other than
BT”.
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
ENG - 15
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
Only one Samsung TV can be connected at a time.
Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the BT PAIRING mode.
PAIR
(OR)
a. Press the
(Multi Function) button on the top panel and then select BT”.
BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.
Top of the Soundbar
BT READY
b. When “BT READY appears, press and hold the (Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
display BT PAIRING”.
5 Sec
Top of the Soundbar
BT PAIRING
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List Soundbar Q-Series
(Bluetooth))
3. Select Soundbar Q-Series from the list on TVs screen.
An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
When the Samsung TV is connected, [TV Name] BT appears on the Soundbars front display.
4. You can now hear Samsung TV sound from the Soundbar.
After you have connected the Soundbar to your Samsung TV the rst time, use the BT READY mode to reconnect.
If the device fails to connect
If you have an existing Soundbar (e.g., Soundbar Q-Series) on the list of speakers on the Samsung TV, delete it.
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the mode other than
BT”.
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
ENG - 15
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
Only one Samsung TV can be connected at a time.
Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the BT PAIRING mode.
PAIR
(OR)
a. Press the
(Multi Function) button on the top panel and then select BT”.
BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.
Top of the Soundbar
BT READY
b. When “BT READY appears, press and hold the (Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
display BT PAIRING”.
5 Sec
Top of the Soundbar
BT PAIRING
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List Soundbar Q-Series
(Bluetooth))
3. Select Soundbar Q-Series from the list on TVs screen.
An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
When the Samsung TV is connected, [TV Name] BT appears on the Soundbars front display.
4. You can now hear Samsung TV sound from the Soundbar.
After you have connected the Soundbar to your Samsung TV the rst time, use the BT READY mode to reconnect.
If the device fails to connect
If you have an existing Soundbar (e.g., Soundbar Q-Series) on the list of speakers on the Samsung TV, delete it.
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the mode other than
BT”.
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
ENG - 15
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
Only one Samsung TV can be connected at a time.
Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the BT PAIRING mode.
PAIR
(OR)
a. Press the
(Multi Function) button on the top panel and then select BT”.
BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.
Top of the Soundbar
BT READY
b. When “BT READY appears, press and hold the (Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
display BT PAIRING”.
5 Sec
Top of the Soundbar
BT PAIRING
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List Soundbar Q-Series
(Bluetooth))
3. Select Soundbar Q-Series from the list on TVs screen.
An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
When the Samsung TV is connected, [TV Name] BT appears on the Soundbars front display.
4. You can now hear Samsung TV sound from the Soundbar.
After you have connected the Soundbar to your Samsung TV the rst time, use the BT READY mode to reconnect.
If the device fails to connect
If you have an existing Soundbar (e.g., Soundbar Q-Series) on the list of speakers on the Samsung TV, delete it.
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the mode other than
BT”.
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
Con
necting via Bluetooth


 












The initial connection
 
t





 
O














 


0
 





 





 







 














 









 








Disconnecting the Sound ba
r
from the Samsung TV

O


 












Table of Contents

Other manuals for Samsung HW-Q990D

Related product manuals