Samsung HW-Q990D - Using the Q-Symphony Function; Using the SpaceFit Sound; Using a Wireless Connection; Connecting via Bluetooth

Using the Q-Symphony
Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the sound
simultaneously through the Soundbar and the TV. If you use
the Q-Symphony function, the surround sound played on
the TV allows you to enjoy a richer, more three-dimensional
surround sound effect.
When the Soundbar is connected, “Q-Symphony” menu
appears on the TV. (The message displayed may differ with
the TV model.)
(Settings (
࣎Ɗʪϩϩ˝ϑ ࣍ ࣎ƊͱЇʒƊͱЇʒ
Output)
Using the SpaceFit Sound
This function analyzes the user’s listening space with the
Soundbar’s microphone and provide optimal sound for the
space. Sound optimization proceeds automatically.
05USING A WIRELESS
CONNECTION
Connecting via Bluetooth
OR
OR
Top of the Soundbar
5sec
BT PAIRING
• Search for the Bluetooth device on your TV or mobile
device.
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new device
to the Soundbar.
(Press the
PAIR button on the Soundbar remote
control or press and hold the
(Mic On/Off) button on
the top of the Soundbar for more than 5 seconds while
the Soundbar is in “BT” mode.)
NOTE
• Ã˙ɇϑʪʒ˙ͱθɇťÃĘʀͱʒʪи˵ʪʀͱʪʀϩ˝ɇ9Їʪϩͱͱϩ˵
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a wireless
ʪϩиͱθ࣍Ǯࣗ࣎ࡡϩ˵ʪSmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.) to
ϩ˵ʪǮࣗʪϩиͱθϩ˵ʪƟǤϑʀͱʪʀϩʪʒϩͱࢋ
2. Install and launch the SmartThings app on your mobile
device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile
ʒʪЭʀʪϩͱʀͱʪʀϩϩ˵ʪƊͱЇʒɵɇθϩͱцͱЇθǮࣗʪϩиͱθࢋ
06TROUBLESHOOTING
Refer to the instructions below if this product does not
function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help,
turn off the product, disconnect the power cord, and
contact Samsung Electronics at 1-800-SAMSUNG (1-800-
726-7864).
Soundbar does not turn on.
• A˵ʪʀи˵ʪϩ˵ʪθϩ˵ʪΧͱиʪθʀͱθʒͱ˙ϩ˵ʪƊͱЇʒɵɇθϑ
correctly inserted into the outlet.
When the subwoofer or surround sound speakers are not
automatically connected
1. Turn off the Soundbar main unit.
2. Press and hold ID SET on the rear of the subwoofer
ɇʒϑЇθθͱЇʒϑΧʪɇʪθϑ˙ͱθɇϩʪɇϑϩߦϑʪʀͱʒϑࢋ
Rear of Subwoofer
"Blinking blue fast"
5sec
Rear of the Left and Right
Surround Speakers
"Blinking blue fast"
5sec
Using the Q-Symphony
Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the sound
simultaneously through the Soundbar and the TV. If you use
the Q-Symphony function, the surround sound played on
the TV allows you to enjoy a richer, more three-dimensional
surround sound effect.
When the Soundbar is connected, “Q-Symphony” menu
appears on the TV. (The message displayed may differ with
the TV model.)
(Settings (
࣎Ɗʪϩϩ˝ϑ ࣍ ࣎ƊͱЇʒƊͱЇʒ
Output)
Using the SpaceFit Sound
This function analyzes the user’s listening space with the
Soundbar’s microphone and provide optimal sound for the
space. Sound optimization proceeds automatically.
05USING A WIRELESS
CONNECTION
Connecting via Bluetooth
OR
OR
Top of the Soundbar
5sec
BT PAIRING
• Search for the Bluetooth device on your TV or mobile
device.
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new device
to the Soundbar.
(Press the
PAIR button on the Soundbar remote
control or press and hold the
(Mic On/Off) button on
the top of the Soundbar for more than 5 seconds while
the Soundbar is in “BT” mode.)
NOTE
• Ã˙ɇϑʪʒ˙ͱθɇťÃĘʀͱʒʪи˵ʪʀͱʪʀϩ˝ɇ9Їʪϩͱͱϩ˵
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a wireless
ʪϩиͱθ࣍Ǯࣗ࣎ࡡϩ˵ʪSmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.) to
ϩ˵ʪǮࣗʪϩиͱθϩ˵ʪƟǤϑʀͱʪʀϩʪʒϩͱࢋ
2. Install and launch the SmartThings app on your mobile
device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile
ʒʪЭʀʪϩͱʀͱʪʀϩϩ˵ʪƊͱЇʒɵɇθϩͱцͱЇθǮࣗʪϩиͱθࢋ
06TROUBLESHOOTING
Refer to the instructions below if this product does not
function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help,
turn off the product, disconnect the power cord, and
contact Samsung Electronics at 1-800-SAMSUNG (1-800-
726-7864).
Soundbar does not turn on.
• A˵ʪʀи˵ʪϩ˵ʪθϩ˵ʪΧͱиʪθʀͱθʒͱ˙ϩ˵ʪƊͱЇʒɵɇθϑ
correctly inserted into the outlet.
When the subwoofer or surround sound speakers are not
automatically connected
1. Turn off the Soundbar main unit.
2. Press and hold ID SET on the rear of the subwoofer
ɇʒϑЇθθͱЇʒϑΧʪɇʪθϑ˙ͱθɇϩʪɇϑϩߦϑʪʀͱʒϑࢋ
Rear of Subwoofer
"Blinking blue fast"
5sec
Rear of the Left and Right
Surround Speakers
"Blinking blue fast"
5sec
Using the Q-Symphony
Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the sound
simultaneously through the Soundbar and the TV. If you use
the Q-Symphony function, the surround sound played on
the TV allows you to enjoy a richer, more three-dimensional
surround sound effect.
When the Soundbar is connected, “Q-Symphony” menu
appears on the TV. (The message displayed may differ with
the TV model.)
(Settings (
࣎Ɗʪϩϩ˝ϑ ࣍ ࣎ƊͱЇʒƊͱЇʒ
Output)
Using the SpaceFit Sound
This function analyzes the user’s listening space with the
Soundbar’s microphone and provide optimal sound for the
space. Sound optimization proceeds automatically.
05USING A WIRELESS
CONNECTION
Connecting via Bluetooth
OR
OR
Top of the Soundbar
5sec
BT PAIRING
• Search for the Bluetooth device on your TV or mobile
device.
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new device
to the Soundbar.
(Press the
PAIR button on the Soundbar remote
control or press and hold the
(Mic On/Off) button on
the top of the Soundbar for more than 5 seconds while
the Soundbar is in “BT” mode.)
NOTE
• Ã˙ɇϑʪʒ˙ͱθɇťÃĘʀͱʒʪи˵ʪʀͱʪʀϩ˝ɇ9Їʪϩͱͱϩ˵
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a wireless
ʪϩиͱθ࣍Ǯࣗ࣎ࡡϩ˵ʪSmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.) to
ϩ˵ʪǮࣗʪϩиͱθϩ˵ʪƟǤϑʀͱʪʀϩʪʒϩͱࢋ
2. Install and launch the SmartThings app on your mobile
device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile
ʒʪЭʀʪϩͱʀͱʪʀϩϩ˵ʪƊͱЇʒɵɇθϩͱцͱЇθǮࣗʪϩиͱθࢋ
06TROUBLESHOOTING
Refer to the instructions below if this product does not
function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help,
turn off the product, disconnect the power cord, and
contact Samsung Electronics at 1-800-SAMSUNG (1-800-
726-7864).
Soundbar does not turn on.
• A˵ʪʀи˵ʪϩ˵ʪθϩ˵ʪΧͱиʪθʀͱθʒͱ˙ϩ˵ʪƊͱЇʒɵɇθϑ
correctly inserted into the outlet.
When the subwoofer or surround sound speakers are not
automatically connected
1. Turn off the Soundbar main unit.
2. Press and hold ID SET on the rear of the subwoofer
ɇʒϑЇθθͱЇʒϑΧʪɇʪθϑ˙ͱθɇϩʪɇϑϩߦϑʪʀͱʒϑࢋ
Rear of Subwoofer
"Blinking blue fast"
5sec
Rear of the Left and Right
Surround Speakers
"Blinking blue fast"
5sec
Using the Q-Symphony
Function
  




 






 

Using the SpaceFit Sound



 


Connecting via Bluetooth




What is the difference between BT READY and BT
PAIRING?

  



    




0 
 



NOTE


   

Connecting via Wi-Fi (Wireless
Network)

       


 

 

 
  













 
 







