ENG - 11
SOUND MODE
By pressing the button, you can select the desired audio mode. Each time the mode changes, the
Multicolour LED blinks in white.
LED
Indicator
White Blinks X1
“Adaptive Sound” “Music” “DTS Virtual:X” “Standard”
– Adaptive Sound
Analyzes the content in real time and automatically provides an optimal sound eld based on the
characteristics of the content.
– Music
Provides more natural and room lling sound for music content.
– DTS Virtual:X
Immersive 3D sound from any content.
– Standard
Outputs the original sound.
• Bluetooth Power On/Off
This feature automatically turns the Soundbar on when it receives a connection request from a
previously connected TV or Bluetooth device. The setting is On by default.
– Press and hold the SOUND MODE button for more than 5 seconds to turn off the Bluetooth
Power function.
• DRC (Dynamic Range Control) On/Off
Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE
button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range
Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)
SOUND MODE button LED Indicator
SOUND
MODE
5 Sec
Cyan Blinks X1
On (Default)
Off
Red Blinks X1
DRC On/Off Toggle On Off
To Next Page
Loading...
