ENG - 3
01 CHECKING THE COMPONENTS
VOL WOOFER
SOUNDBAR
SOUND
MODE
PAIR
Soundbar Main Unit Subwoofer Remote Control (AH81-13358A) /
Batteries
x 2
Power Cord (Subwoofer, Soundbar)
(AH81-11680A)
Optical Cable
(AH81-11681A)
• For more information about the power supply and power consumption, refer to the label attached
to the product. (Label: Bottom of the Soundbar Main Unit)
• To purchase additional components or optional cables, contact a Samsung Service Center or
Samsung Customer Care.
• There are two wall mount holes (M4 size) at the bottom of the Soundbar. Individually purchase a
compatible bracket and mount the Soundbar on a wall to suit your preferences.
Inserting Batteries before using the Remote Control (AA batteries X 2)
Slide the back cover in the direction of the arrow
until it is completely removed. Insert 2 AA batteries
(1.5V) oriented so that their polarity is correct. Slide
the back cover back into position.
02 PRODUCT OVERVIEW
Front Panel / Top Panel of the Soundbar
Display
Position the product so that
the SAMSUNG logo is
located on the top.
Top Panel
Volume Power
Bottom Panel of the Soundbar
USB (5V 0.5A)
DIGITAL AUDIO IN
(OPTICAL)
POWER
USB (5V 0.5A)
DIGITAL AUDIO IN
(OPTICAL)
POWER
Source
Selects the source input mode. (D.IN / BT / USB)
• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press
and hold the (Source) button for more than 5 seconds.
DIGITAL AUDIO
IN (OPTICAL)
Connect to the digital (optical) output of an external device.
USB (5V 0.5A)
Connect a USB device here to play music les stored on the USB device through the
Soundbar.
POWER Connect the Soundbar's AC power cable.
To Next Page
Loading...
