Samsung HW-T550 - Method 2. Connecting Wirelessly

Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
·· t ··
OR
The initial connection
1. Press the * PAIR button on the remote control to enter the " BT PAIRING " mode.
(OR) a. Press the~ (Source) button on the top panel and then select " BT" .
" BT" changes to " BT PAIRING " in a few seconds automatically or changes to " BT READY " if
there is a connect record.
b. When " BT READY " appears, press and ho ld the~ (Source) button on the top panel of the
Sound bar for more than 5 seconds to display " BT PAIRING ".
2. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
3. Select " [AV] Samsung Sound bar TS-Series " from the list on TV's screen.
An available Sound bar is indicated with " Need Pairing " or " Paired " on the TV's Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection .
• When the TV is connected, [ TV Name ] ➔ " BT" appears on the Sound bar's front di splay.
4. You can now hear TV sound from the Sound bar .
If the device fails to connect
• If a previously connected Soundbar listing (e.g. " [AV] Samsung SoundbarTS-Series ") appears in the
list, delete it.
• Then repeat steps 1 through 3.
ENG-11