Samsung HW-T550 - CONNECTING A MOBILE DEVICE

07 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• The connection is limited to one TV or two Bluetooth devices at the same time.
OR
Bluetooth device
The initial connection
1. Press the t PAIR button on the remote control to enter the " BT PAIRING " mode .
(OR) a. Press the cg] (Source) button on the top panel and then select " BT" .
" BT" changes to " BT PAIRING " in a few seconds automatically or changes to "BT READY " if
there is a connect record.
b. When " BT READY " appears, press and hold the cg] (Source) button on the top panel of the
Sound bar for more than 5 seconds to display " BT PAIRING ".
2. On your device, select " [AV] Samsung Sound bar TS - Series " from the list that appears.
• When the Sound bar is connected to the Bluetooth device, [ Bluetooth Device Name ] ➔ "B T"
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Sound bar.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. " [AV] Samsung SoundbarTS-Series ") appears in the
list, delete it.
• Then repeat steps 1 and 2.
NOTE
• After you have connected the Sound bar to your mobile device the first time, use the " BT READY "
mode to reconnect. See Page 12 for details.
For more information about Bluetooth connections, refer to "Connecting a TV via
Bluetooth" on pages 11 -12 .
ENG-16