Samsung HWJ7501 - Connecting with a HUB (Not Included)

15
14
CONNECTIONS
CONNECTING WITH A HUB (NOT INCLUDED)
AUX IN
LAN HDMI IN
OPTICAL IN
HDMI OUT
(TV-ARC)
5V 0.5A
SPK ADDWi-Fi SETUP
DC 24V
DC 24V
Power
connection
Power connection
HUB
LAN cable
Wireless Router
1
Connect a LAN cable to the router and the ETHERNET SWITCH on the back of
the HUB.
• If the product is already connected to the router by wire, disconnect the
LAN cable from the product and then connect the cable between the
hub and router.
• You can connect the LAN cable to any ETHERNET SWITCH port on the
HUB.
2
Attach the HUB's power cord to the power port on the rear of the HUB, and then
plug the power cord into an electrical outlet.
3
The power ( ) and the HUB ( ) indicators on the HUB's front turn on.
When the pairing indicator ( ) begins to flash, plug the product(s) into an
outlet.
If the HUB's pairing indicator does not flash, press the SPK ADD button on the
rear of the HUB.
• If you are adding multiple products, connect all the product's to electrical
outlets. If you are not connecting all the products, refer to pages
13~14.