48
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
● Is the power cord plugged into the
outlet?
¼ Connect the power cord to the outlet.
Sound is not produced.
● Is the Mute function on?
● Is the volume set to minimum?
¼ Press the Mute button to cancel the
function.
¼ Adjust the Volume.
HUB doesn't work properly.
● Is the HUB plugged in?
● Is the LAN cable connected to the
wireless router and the HUB properly?
● When the Hub is plugged in, do the
HUB's front indicators show it's
operating properly?
¼ Plug in the HUB.
¼ Connect the LAN cable to the
ETHERNET SWITCH on the back of
the HUB and to your wireless router.
¼ Reset the HUB.
¼ If you experience troubles with
connecting the HUB and product, try
relocating the product so that the
product is closer to the wireless router
or HUB.
To Next Page
Loading...
