Samsung IAB Series - 5. Frame Bezel Installation

104 pages

To Next Page

To Previous Page

LED R&D Lab(VD)

5. Frame Bezel Installation

① Install the left and right side bezels first.

- Put the FRAME BEZEL SIDE on the left/right side of the CABINET and check if it does not match the screen.

- Move the front position according to mismatch and attach it.

Check the gap

Main Page

LED Display Install Manual IAB SeriesLH008IAB***LH012IAB*** LH016IAB***1
슬라이드 번호 22
Table of contents3
1. Product and installation information4
1. Product and installation information5
1. Product and installation information6
1. Product and installation information7
1. Product and installation information8
1. Product and installation information9
1. Product and installation information10
1. Product and installation information11
1. Product and installation information12
1. Product and installation information13
1. Product and installation information14
1. Product and installation information15
1. Product and installation information16
Table of contents17
슬라이드 번호 1818
슬라이드 번호 1919
Table of contents20
3. Wall Mount21
Table of contents22
4. FRAME installation and cable connection23
4. FRAME installation and cable connection24
4. FRAME installation and cable connection25
4. FRAME installation and cable connection26
4. FRAME installation and cable connection27
4. FRAME installation and cable connection28
4. FRAME installation and cable connection29
4. FRAME installation and cable connection30
4. FRAME installation and cable connection31
4. FRAME installation and cable connection32
4. FRAME installation and cable connection33
4. FRAME installation and cable connection34
4. FRAME installation and cable connection35
4. FRAME installation and cable connection36
4. FRAME installation and cable connection37
4. FRAME installation and cable connection38
Table of contents39
5. Frame Bezel Installation40
5. Frame Bezel Installation41
5. Frame Bezel Installation42
Table of contents43
Dehumidification mode guide44
슬라이드 번호 4545
슬라이드 번호 4646
슬라이드 번호 4747
슬라이드 번호 4848
슬라이드 번호 4949
슬라이드 번호 5050
슬라이드 번호 5151
Table of contents52
7. IP Manual setting Guide53
7. IP Manual setting Guide54
7. IP Manual setting Guide55
슬라이드 번호 5656
Table of contents57
Product disassembly method – 1) Screen Desorption58
Product disassembly method – 2) Internal disassembly of docking station59
Product disassembly method – 2) Internal disassembly of docking station60
Product disassembly method – 2) Internal disassembly of docking station61
Product disassembly method – 2) Internal disassembly of docking station62
Product disassembly method – 2) Internal disassembly of docking station63
Product disassembly method – 2) Internal disassembly of docking station64
Product disassembly method – 2) Internal disassembly of docking station65
Product disassembly method – 2) Internal disassembly of docking station66
Product disassembly method – 2) Internal disassembly of docking station67
Product disassembly method – 2) Internal disassembly of docking station68
Product disassembly method – SMPS disassemble ※caution69
Product disassembly method – 3) Sub Screen Internal decomposition70
Product disassembly method – 3) Sub Screen Internal decomposition71
Product disassembly method – 3) Sub Screen Internal decomposition72
Product disassembly method – 3) Sub Screen Internal decomposition73
Product disassembly method – 3) Sub Screen Internal decomposition74
Product disassembly method – 3) Sub Screen Internal decomposition75
Product disassembly method – 3) Sub Screen Internal decomposition76
Product disassembly method – 4) LED module replacement77
Product disassembly method – 4) LED module replacement78
Product reassembly method – 1) LED module step control79
Product reassembly method – 2) Sub Screen80
Product reassembly method – 3) Docking Station81
Product reassembly method – 4) Screen attachment82
Product reassembly method – 5) Sub screen seam control83
Product reassembly method – 5) Sub screen seam control84
Product reassembly method – 5) Sub screen seam control85
Table of contents86
SVC – Firmware setting when replacing TCON board87
SVC – Firmware setting when replacing TCON board88
Table of contents89
Calibration 종류90
Calibration 종류91
슬라이드 번호 9292
슬라이드 번호 9393
슬라이드 번호 9494
슬라이드 번호 9595
슬라이드 번호 9696
슬라이드 번호 9797
슬라이드 번호 9898
슬라이드 번호 9999
슬라이드 번호 100100
슬라이드 번호 101101
슬라이드 번호 102102
슬라이드 번호 103103
슬라이드 번호 104104

Samsung IAB Series - 5. Frame Bezel Installation

Table of Contents

Other manuals for Samsung IAB Series

Related product manuals