A. Definition
Dehumidification pattern output start and dehumidification mode end for LED device unit (pixel) dehumidification of LED
module are managed.
B. Detailed description
1. In the sleep mode, the hidden key (MUTE → 3 → 7 → 9 → EXIT) enters the dehumidification mode.
2. When dehumidification mode is turned on, the dehumidification mode pattern (24 hours, change the pattern that gets
brighter every 2 hours, play Full White in the section from 22:00 to 24:00).
3. To exit the dehumidification mode, press the hidden key (MUTE → 3 → 7 → 9 → EXIT) to enter the standby mode.
< Dehumidification mode hidden key >
< Dehumidification mode entry photo >
Dehumidification mode guide – Remote control hidden key method
To Next Page
Loading...
