96
LED R&D Lab(VD)
SMC 사용법
Pattern Display for Auto Focus
→ Changed to Gray Pattern after Focus adjustment
⑥
6. Adjust the screen to fit the screen.
7. If the screen does not fit, slice the mobile phone screen to the right
and adjust the screen to fit the screen using the zoom button on
the pop-up window.
8. Press the Adjust button to start calibration.
※ Other button description
⑨ MEASURE : Picture file save button
⑩ INT GAIN : Do not apply the proceeded SMC cal,
but apply the existing value
⑦
⑧
⑩
⑨
Gradation Calibration – Adjust SMC Reference selection
[Calibration procedure]
Enter the IP → Click ‘Connected’ button → Ref & Target setting → Click ‘Next’ button
→ Screen switching → Camera screen target positioning → Click ‘Adjust’ button
→ Measurement complete
To Next Page
Loading...
