LED R&D Lab(VD)
128
□ Module disassemble
※ Decomposable to 2*3
Product disassembly method – 4) LED module replacement
④ Pull from the front of the module to
the adsorber and press forward from
the back.
(Separation from the floating connector of the bridge board)
① Check the module location that
needs to be disassembled.
② Bridge Board Removal.
(mini board No separation
required)
③ Disassembly of rear screw (23
pieces)
Module to work with
Remova
l
Remova
l
Bridge Board 8 screw
decomposition
23 screw
decomposition
Step adjustment
point
※ It is necessary to check if there is
a screw at the step adjustment
point
Floating
Connector
PU
SH
PU
SH
To Next Page
Loading...
