156
LED R&D Lab(VD)
- IWJ, IWR model
→ SMC should be proceeded separately in Dynamic
Peaking ON / OFF
When operating remote control
.MENU → Picture → LED HDR
→ Turn on Dynamic Contrast Optimization
→ SMC Calibration
.MENU → Picture → LED HDR
→ Turn off Dynamic Contrast Optimization
→ SMC Calibration
When operating LSM
. Dynamic Peaking ON/OFF at the bottom of S-BOX
setting menu
- After replacing the cabinet, make sure to specify Ref and
calibrate it.
Caution
LSM
Setting
-. IP setting of WIFI router and IAB
-. Check if the layout of all cabinets is normal in LSM.
-. SMC (Sub Module Calibration) app install
Preparation
work
Default
ON
If you need SMC, contact the person in charge of B2B
at the head office
Download
Gradation Calibration - SMC
To Next Page
Loading...
