LED R&D Lab(VD)
45
⑭ Move the headless bolt through the hole of the DECO TOP
- The SET tilt can be removed using a headless bolt and the Y-axis can be adjusted to remain horizontal.
- After adjustment, separate the LEFT and TOP DECO from the SET.
Fig.1 point
COVER-DECO TOP
LED MODULE
BOLT-ETC
(TILT remove)
Remove DECO after checking
horizontal and vertical
Fig.2 Deco removal after tilt check
Insert Wrench
A
A
section A-A
4. FRAME installation and cable connection
To Next Page
Loading...
