Samsung IAB Series - 4. FRAME installation and cable connection

LED R&D Lab(VD)
55
①BN39-
02743B
②BN39-
02743A
③BN39-
02776A
MAIN
B’d
SMPS
B’d
SMPS
B’d
SMPS
B’d
Inlet
B’d
OCM fixed
injection
LEFT CENTER RIGHT
⑦ Cable connection on the frame side(110 inch)
① Connect the BN39-02743B (OCM) to the main OCM2 connector, spread it over the LEFT frame fixed injection, and hang it.
② Connect the BN39-02743A (OCM) to the Main OCM3 connector, then stretch it over the CENTER frame fixed injection
③ BN39-02776A (OCM) is fastened to the main OCM4 connector, and then stretched over the RIGHT frame fixed injection.
※ Mark the OCM cable connection location as SILK at the main b’d OCM connector location
BN39-02743B
BN39-02743A
BN39-02776A
146” Reference position
110” Reference position
Fig.1 Main b’d Silk
Form the cable under the
insulator
4. FRAME installation and cable connection