LED R&D Lab(VD)
64
⑭ When the ASSY BRACKET P-FRONT installation is complete, fix it with the BRACKET SUPPORT on the left and right sides.
- BRACKET-SUPPORT assembly position is generally assembled with top/bottom center 3POINT. (Addable depending on the situation)
- After assembling the SCREW-SPECIAL into the BRACKET-SUPPORT, turn it and push the inside.
Fig.1 BRACKET-SUPPORT INSTALL
BRACKET-SUPPORT LEFT RIGHT
SCREW SPECIAL
SCREW MACHINE
4. FRAME installation and cable connection
To Next Page
Loading...
