Samsung J700T1 - Page 70

65
Wi-FiSettings
Wi-Fi Options
The Wi-Fi settings menu allows you to set up many
of your device’s advanced Wi-Fi services.
1. From a Home screen, tap Apps >
Settings.
2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.
3. Tap More for options:
•
Add network: Manually add a Wi-Fi network.
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN used by your
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment
(notconfigurable).
•
Smart network switch: Connect automatically
to a mobile network connection when the Wi-Fi
connection is unstable.
•
Advanced:
-
Network notification: Receive notifications
when open networks in range are detected.
-
Hotspot 2.0: Automatically connect to Wi-Fi
access points that support Hotspot 2.0.
-
Keep Wi-Fi on during sleep: Specify when
to disconnect from Wi-Fi.
-
Install network certificates: Install
authentication certificates.
-
MAC address: View your device’s
MAC address, which is required when
connecting to some secured networks
(notconfigurable).
-
IP address: View your device’s IP address
(not configurable).
Wi-Fi Direct
Wi-Fi Direct allows direct device-to-device
connections using Wi-Fi, without having to connect
to a Wi-Fi network.
1. From a Home screen, tap Apps >
Settings.
2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.
•
Wi-Fi must be on to configure settings.
3. Tap Wi-Fi Direct. Your device automatically
scans for nearby Wi-Fi Direct devices.
4. Select a device, and then follow the prompts to
complete the connection.
Wi-Fi Direct Status Indicator
Statusbar icons indicate your current Wi-Fi Direct
connection status:
•
When your device is connected to another device
using Wi-Fi Direct,
Wi-Fi Direct is displayed in
the Status bar.