42
2nd 3rd Description
Security
"
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
"
Change the PIN to keep your device secure.
Safety Lock On Turn Safety Lock On on or off. Safety Lock On restricts the actions that can be carried out by the remote control. The correct
PIN must be entered to turn Safety Lock On off.
Remote Management You can Allow or Deny external commands to access your product via a network.
Secured Protocol Secure the protocol between this device and other devices.
• SNMP Settings
Set up your ID and password for the SNMP connection.
"
This function may not be supported depending on the model.
Server Security Status Displays the information of the MagicInfo server.
"
You can use this function when the product is connected to the MagicInfo or RM server.
Network Lock Block external network access. You can register networks on the server to allow access.
Certificate Manager Manage the certificates installed on this device.
"
Limited supports for Enterprise WPA2 (TLS/TTLS/PEAP) certified models only.
"
This function may not be supported depending on the model.
• Install Certificate
Connect a USB flash drive that contains certificates to install them on this device.
• Certificate List
View and manage the certificates installed on this device.
Wired 802.1x Connection Enable this option to connect to a wired 802.1x network.
To Next Page
Loading...
