Control & Connection Panel
Control & Connection Panel
Ⅱ. Inside of Tanzanite Model
3 ANT IN
To view television channels correctly, a signal must be received by the set from one of
the following sources:
-
An outdoor aerial / A cable television network / A satellite network
4 EXT 1, EXT 2
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video
disc players.
5 COMON INTERFACE Slot (DTV Only)
- When not inserting "CI CARD" in some channels, "Scrambled Signal" is displayed on the
screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other
information will be displayed in about 2~3 minutes. If an error message is displayed,
please contact your service provider.
-
When the channel information configuration has finished, the message "Updating
Completed" is displayed, indicating that the channel list is now updated.
★ You must obtain a CI CARD from a local cable service provider. Remove the CI CARD
by carefully pulling it out with your hands since dropping the CI CARD may cause
damage to it.
★ Insert the CI-Card in the direction marked on it.
To Next Page
Loading...
