User control functions
1. Source key : Select Video source
1.1 : Cabinet side Function key
PAL 32”/37”/40” : TV Ext1→ →Ext2 AV→ →
S-Video Component PC HDMI1→ → → →HDMI2→HDMI3 (DTV)→
1.2 : Remote control Function key
PAL 32”/37”/40” : TV Ext1 Ext2 AV→ → → →
S-Video Component PC HDMI1 HDMI2 HDMI3 (DTV)→ → → → → →
2. Menu key : Open the OSD and Exit the highlighted function.
3. : - ◀ ▶ Moves the selector left or right on the OSD.
- Increase or decrease the values of the selected function
- VOL + : Increase or decrease the level of audio volume.
(in the Anynet mode, You can control only TV volume)
4. : ▼ ▲ Moves the selector up or down on the OSD.
- CH + : Increase or decrease the channel number .
5. Power : 1) Turn ON/OFF the TV.
2) Indicates the status of the Monitor.
- Black : Normal Operation.
- Red : Power Off or Disconnected Signal Cable.
- Red Blinking : PC DPMS Mode.
Ⅱ. Inside of Tanzanite Model
Some Functions of Tanzanite
Some Functions of Tanzanite
To Next Page
Loading...
