SOUND AMP:NTP3100
Description
NTP3100 is a single chip full digital audio amplifier including power stage for stereo
amplifier system. NTP3100 is integrated with versatile digital audio signal
processing functions, high-fidelity fully digital PWM modulator and two high-power
full bridge MOSFET stages.
NTP3100 receives 2-channel serial audio data with sampling frequency from 8 kHz
to 192kHz. It delivers 2x20W in stereo mode without heat sink.
Combining use of built-in mixer and biquad-filters can make additional
preprocessing like bass management, loudness control, loud speaker response
compensation and preset parametric equalizers possible.
All the functions of NTP3100 are set by I2C register configuration.
Ⅱ. Inside of Tanzanite Model
To Next Page
Loading...
