Samsung LE32T51B - Setting up the PC; PC Software Setup (Windows XP); Display Modes

3 Alignments and Adjustments
3-8
3-4 TORINO Micom Update
3-4-1 Installing G-Probe
1. Uncompress GProbe5.1.0.18.zip.
2. Run GProbe5.1.0.18.exe.
3. The files are created in the C:
Program Files Genesis Microchip GProbe 5 folder.
4. Copy the ispoak_spi.hex file to the C: Program Files Genesis Microchip GProbe 5 folder.
5. Uncompress FLI5961-AC_GProbe_S0006-CSC-33B.zip.
6. Three files are extracted (FLI5961.Chip.GProbe, FLI5961.chm).
7. Copy all 2 files to the C:
Program Files
Genesis Microchip GProbe 5 ChipDB folder.
8. Run GProbe.exe in the C: Program Files Genesis Microchip GProbe 5 folder. The G-Probe program
is created.
<The screen that appears when G-Probe is successfully installed>