4-1-2. No Video (Analog PC signal)
Symptom Audio is normal but no picture is displayed on the screen. -
Major
checkpoints
Check the PC source -
Check the Arsenal, Check the Valencia. -
Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. -
Diagnostics
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the LVDS cable?
Replace the T-con / LCD panel?
Yes
Yes
Yes
Yes
No
No
Check a set in the ‘Stand-by mode’
or ‘DPMS mode’.
Please, Contact Tech support.
Input the analog PC signal properly.
Check the PC source and
check the connection of D-SUB ?
No
Check CN401, PC cable.
Change the Main Assy.
Check IC1101 and IC1701.
Change the Main Assy.
No
No
Check the signal appear at input of IC901 ?
PC_RED : C1055
PC_GREEN : C1056
PC_BLUE : C1057
PC_H_SYNK : C509
PC_V_SYNK : C510
Check the LVDS clk signal at output of
Main board? (TX1~TX4)
TP1916 ~1919
TP1940 ~1943
4
5
Caution Make sure to disconnect the power before working on the IP board.
To Next Page
Loading...
