LED R&D Lab(VD)
65
※ Pre-work before cabinet installation
- HDBase-T Cable, Bluetooth/Wi-Fi module, and 24pin system cable are connected to Bridge Box.
- IR/ECO sensor module connects to IG Group 1.
5. Cabinet + Frame installation
Bridge Box
Bottom Sensor(Bluetooth/Wi-Fi)
24pin system Cable
Bluetooth/Wi-Fi Cable
HDBaseT Cable
Interface Gender
Sensor Top(IR/ECO Sensor)
OC (Fiber) Cable
[S-Box]
※instructions
Connect the IR/ECO sensor
to IG Group 1 and use it.
To Next Page
Loading...
