Samsung Electronics
① S-Box Picture Setting according to model
85
• The default picture configurations are optimized for LH015IFH in Samsung factory.
• The picture configurations will be configured automatically when you finish the installation.
• For the best picture quality, Please connect S-Box and LED displays via LSM software properly.
• The 1
st
LED Display(I/G) must be connected to HDBT port #1 in S-Box
• The Picture configuration will be set base on the model of the 1
st
Master LED display which is connected to HDBT port #1 in S-Box.
Control PC
(LSM)
S-box
Ethernet
Interface Gender
Vx1
……………
HDBT
Vx1+Ethernet
* If the S-Box and LED Displays are not connected properly by LSM, the picture quality might not be correct.
<Connected condition in LSM>
Cabinet 1
(Master)
Cabinet N
• S-BOX Connection (Panel Configuration)
8. S-BOX Installation and Connection
To Next Page
Loading...
