LED R&D Lab(VD)
119
□ Settings for each SET (HDR)
Remote Control button – Picture – LED HDR – Dynamic Peaking – ‘HIGH’ or ‘MID’ or ‘LOW’
Remote Control button – Picture – LED HDR – Multi-Link HDR Settings – Multi-Link HDR On / Number of Devices / Device ID
Set up screen when installing Side by Side, Method 1 – Remote Control
※ Up to 4 screen connections are possible.
※ Set the ID of the leftmost screen to 1 and set 2, 3, and 4 times in the right order.
※ Check if the Picture Enhancer, Brightness Optimizing functions are turned OFF.
Remote Control button – Picture – Advanced Settings – Picture Enhancer OFF
Remote Control button – System – Power and Energy Saving – Brightness Optimizing OFF
source
IAB/IAC set 2
IAB/IAC set 1
IAB/IAC set 3 IAB/IAC set 4
※ Apply the above settings to all SETs in the same way
To Next Page
Loading...
