LED R&D Lab(VD)
126
② IP connection in LSM
Case 3) Select device search function in LSM is used
1) Select the Search button to
search for the set IP and Add
click
2) Model type ‘All In One’ >
connect with existing settings >
Connect Click
3) Repeat process 2 for all
searched SETs
Control Panel – Network and Sharing
center – Change advanced sharing
settings – Turn on network discovery
※ Each SET IP address is searched
Case 3
If you use the device search function in the
LSM is used, You must turn on the network
search of your PC in advance
Set up screen when installing Side by Side, Method 2 – LSM
□ Settings for each SET
If there is a SET setting with the same IP
in the network, IP conflict may occur
To Next Page
Loading...
