LED R&D Lab(VD)
128
1. Product and installation information
2. Preparation of Cabinet installation
3. Wall Mount
4. Frame installation and cable connection
5. Frame Bezel Installation
6. Dehumidification mode guide
7. IP Manual setting Guide
※ Appendix1 - LED MODULE and CIRCUIT replacement method
※ Appendix2 – System Main / TCON / LED Module Update data on replacement
※ Appendix3 – Side by Side installation
※ Appendix4 – LSM connection
※ Appendix5 – Gradation Calibration (SSA)
※ Appendix6 – Framelock mode support timing table
Table of contents
To Next Page
Loading...
