104
Chapter 7. Appendix
PowerSaver
The power saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a
specied period of time. The power is not turned off in power saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power saving mode
only functions when the product is connected to a PC with a power saving function.
PowerSaver Normal operation Power saving mode (SOG
Signal : Not Support the DPM
Mode)
Power off
(Power button)
Rating Typical Max
Power indicator Off Blinking On
Power consumption LH55MLE 000 W 000 W 000 W 0.0 W 0.0 W
LH32MLE 000 W 000 W 000 W 0.5 W
• The displayed power consumption level can vary in different operating conditions or when settings are changed.
• SOG(Sync On Green) is not supported.
• To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product for an
extended period of time (during vacation, etc.).
Preset timing modes
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specied
resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specied for your product.
Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical frequency to 60Hz
using the CDT product before you exchange it with the LCD product.
Model Name LH55MLE / LH32MLE
Synchronization Horizontal frequency 30 - 80 kHz
Vertical frequency 60 - 75 Hz
Resolution Optimum resolution 1920 x 1080 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz
To Next Page
Loading...
