DigitalNR→Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
HDMIBlackLevel→Normal/Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when an external device is connected to the TV via HDMI. The HDMI HDMI Black Level function
may not be compatible with all external devices.
FilmMode→Off/Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
■
N
■
N
■
N
❑
N
To Next Page
Loading...
